|
With all the engine modifications it was time to add some gauges. I installed a tri-pillar and
then a dual pod in front of the shifter on the floor. The tri-pillar has Air/Fuel Ratio, Oil Pressure
and Boost/Vacuum. On the floor is Water Temp and Oil Temp. The oil gauge has two
sensors installed so I can check the temp before and after the oil cooler. There is a switch
next to the gauge to switch between the two. Unfortunately due to where I mounted the two
sensors I don't see a temp difference. I'm going to relocate one of them to see if it makes a
difference. I also plan on installing an EGT gauge for the turbo. That will mount on the dash
on the right side of the steering wheel. I have to make a gauge pod to mount it in though.
|
